AIS-125 ambulance types A, B, C and D: the National Ambulance Code explained

Ambulance Owner Association (AOA) · Updated

Quick answer

AIS-125 is the National Ambulance Code, the Automotive Industry Standard published by ARAI for the Ministry of Road Transport and Highways in August 2014. Part 1 sets how a road ambulance must be built; Part 2 recommends its medical equipment. It defines four types: Type A first responder, Type B patient transport, Type C Basic Life Support and Type D Advanced Life Support. Since 1 April 2018, new ambulances must comply with Part 1.

Key facts

  • AIS-125 (Part 1), August 2014, covers construction of road ambulances; AIS-125 (Part 2) is a guideline list of medical equipment.
  • Rule 125-F of the Central Motor Vehicles Rules, inserted by G.S.R. 868(E) on 8 September 2016, makes Part 1 apply to category L and M ambulances manufactured on and after 1 April 2018.
  • Type C is the Basic Life Support (BLS) ambulance and Type D is the Advanced Life Support (ALS) ambulance; Type B is a patient transport vehicle and Type A a first responder that does not carry a lying patient.
  • The code asks for a brilliant white body (RAL 9010), a mirror-image retro-reflective "AMBULANCE" word on the front, red Battenburg squares on the sides and the Star of Life.
  • MoRTH draft notification G.S.R. 382(E) dated 14 May 2026 proposes rescue equipment for Type B, C and D ambulances and extra batteries for electric ambulances; it was still a draft when we checked in November 2026.

What is AIS-125 and who does it apply to?

AIS-125 is India's National Ambulance Code: an Automotive Industry Standard titled "Constructional and Functional Requirements for Road Ambulances", printed by the Automotive Research Association of India (ARAI) in August 2014 for the Ministry of Road Transport and Highways (MoRTH). It applies to anyone who builds, buys or registers a road ambulance of vehicle category M (cars, vans, buses) or L (two- and three-wheelers).

The code came out of MoRTH's Working Group on Emergency Care, which observed that "the real concept of an ambulance is missing in India" and that almost any vehicle able to carry a lying patient was being called an ambulance. An expert committee chaired from AIIMS New Delhi, with members from ARAI, MoRTH, NHAI, the Army Medical Corps and emergency service operators, drafted it using European, UK and US ambulance standards as references.

The standard has two parts:

  • AIS-125 (Part 1): how the vehicle is built: body, doors, electricals, patient compartment, stretcher, lighting, colours, warning lights and siren. This is the part linked to vehicle type approval.
  • AIS-125 (Part 2): "Medical Equipment for Road Ambulances". It states that medical equipment is not part of vehicle type approval, and its equipment tables are described as "recommendatory".

Part 1 was made legally binding through the Central Motor Vehicles Rules. MoRTH notification G.S.R. 868(E) of 8 September 2016 inserted Rule 125-F, which says road ambulances of categories L and M "manufactured on and after the 1st April, 2018" shall be in accordance with AIS-125 (Part 1)-2014 "as amended from time to time". The same notification tied ambulance warning lamps (Rule 108) and sirens (Rule 119) to the code from the same date.

Three exclusions are written into the scope: the code does not set staff training (that is the responsibility of the operator in whose name the ambulance is registered), it does not cover mobile health units that treat patients only while parked, and it is not mandatory for ambulances of the armed forces, para-military forces and police.

What are ambulance Types A, B, C and D?

AIS-125 (Part 1), clause 3.3, sorts road ambulances by the level of care they can give: Type A is a first responder, Type B a patient transport vehicle, Type C a Basic Life Support ambulance and Type D an Advanced Life Support ambulance. The table below sums up each type from the code itself.

TypeName in AIS-125Purpose (clause 3.3)Typical vehicleSeats besides driver (Table 3) and crew seats in patient area (Table 6)Equipment level (Part 2)
AMedical First ResponderGives emergency care when stationary; cannot carry a patient lying downAny CMVR-approved category M or L vehicle; the code notes 2- and 3-wheelers may be usedNot specified; no patient compartmentFirst aid, portable 2.2 L oxygen, manual suction, mouth-to-mask ventilator, wound dressings
BPatient Transport VehicleTransports patients "not expected to become emergency patients"Van or car with a main stretcher2 places; at least 1 attendant seat beside the stretcherMain stretcher, portable oxygen, manual suction, basic nursing items
CBasic Life Support AmbulanceTransport and treatment of patients needing non-invasive airway management and basic monitoringPanel van with a separate patient compartment3 places; at least 2 crew seatsTwo 10 L oxygen cylinders, resuscitator, electric suction, BP monitor, pulse oximeter, immobilisation kit
DAdvanced Life Support AmbulanceTransport and treatment of emergency patients needing invasive airway management and intensive monitoringLarger panel van with air-conditioned patient compartment4 places; at least 2 crew seats including one at the head of the stretcherAdds defibrillator, cardiac monitor, transport ventilator, capnometer, larger oxygen supply

The "typical vehicle" column is our plain-language reading; the code itself names vehicle categories, not brands. Part 2 also gives a guide weight for all sanitary, medical and technical equipment: 115 kg for Type B, 225 kg for Type C and 260 kg for Type D, which builders must allow for in the gross vehicle weight.

The code also asks that the level of care be written on the body. Clause (ii) of Annexure 1 says Type B, C and D ambulances must carry the words "Patient Transport", "Basic Life Support" or "Advanced Life Support" next to the word AMBULANCE, at no less than half its size. A Type A vehicle carries "FIRST RESPONDER" instead of "AMBULANCE".

What is the difference between a BLS and an ALS ambulance?

A BLS (Basic Life Support) ambulance is Type C under AIS-125 and handles patients who need non-invasive airway support and basic monitoring; an ALS (Advanced Life Support) ambulance is Type D and is built for emergency patients who need invasive airway management and intensive monitoring, so it carries much more equipment, power and space.

The practical differences written into AIS-125 Parts 1 and 2 are:

PointType C (BLS)Type D (ALS)
12 V sockets for medical devices (Part 1, Table 2)Minimum 2Minimum 4
Indicative alternator power, if extra batteries are fitted (Table 1)700 W1200 W
Head space for the doctor or paramedicNot specified64 to 76 cm clear space at the patient's head
Air conditioning (clause 4.5.4.1)OptionalRequired: cool the cabin from 32 °C to 27 °C within 15 minutes and to 25 °C within 30 minutes
Treatment light150 lux at the stretcher150 lux plus an extra treatment light of at least 1650 lux
Stationary oxygen (Part 2, Table 11)At least two 10 L water-capacity cylindersA 46.7 L and a 10 L water-capacity cylinder
Life-support devices (Part 2, Tables 11 and 15)Resuscitator with masks, electric suction, nebuliserAll of BLS plus defibrillator with recording, cardiac monitor, transport ventilator, PEEP valve, capnometer, volumetric infusion device
Stretcher crash test (Part 1, clause 5.0)Forward and backwardForward, backward, sideways and vertical

AIS-125 does not say who must staff each type; it leaves training to the operator. For public ambulance services, the Ministry of Health and Family Welfare's Operational Guidelines for National Ambulance Service (NAS) 2026, released on 29 June 2026, give an indicative crew per shift:

AmbulanceIndicative crew per shift (NAS 2026, section 5.2)
Advanced Life Support (ALS)One driver and one EMT (Advanced); OT assistants or ICU nurses may be used if an advanced EMT is not available, and a doctor may go along with patients who need invasive ventilation or monitoring
Basic Life Support (BLS)One driver and one EMT (Basic)
Patient Transport Vehicle (PTV)One driver

The same guidelines say EMTs should hold valid BLS certification, with ALS/ACLS certification for those on ALS ambulances, and that drivers should hold a valid transport or commercial licence with at least three years of accident-free driving, or as per state norms. NAS Annexure 4 lists 17 equipment items for a BLS ambulance and 28 for an ALS ambulance, aligned with AIS-125. States adopt these guidelines in their own way, so check the version your state uses before you bid for or join a government-linked service.

What does AIS-125 say about the patient compartment and stretcher?

For Type C and D ambulances, AIS-125 (Part 1) asks for a separate, washable patient compartment with a clear walkway beside a crash-tested stretcher, seat belts for every seat, and specific door and loading sizes. The main points in plain language:

Patient compartment (clause 4.5)

  • A partition wall between driver and patient area in Types C and D, with a window (maximum 0.12 square metres) so the crew can see the driver, and a blind so cabin light does not disturb the driver.
  • A clear aisle of 40 ± 15 cm between the main stretcher and the crew bench, and at least 25 cm between the end of the stretcher and the rear door for splints.
  • Ceiling, walls and doors lined with a non-permeable material that resists disinfectant, with sealed edges; drains with plugs if the floor cannot be mopped dry. Type B needs this behind the driver seat.
  • Anti-slip, easy-clean flooring, a lockable drugs compartment, a hand-hold above the stretcher and a wash basin in Types C and D.
  • Interior materials meeting the fire standard IS 15061, and two 2 kg fire extinguishers in Types C and D (clause 4.4.2).

Doors, windows and loading (clauses 4.4.5 and 4.4.6)

  • At least one rear opening and one side opening into the patient area, all sealed against water and dust.
  • Minimum rear opening of 1100 mm high by 1050 mm wide for Type C, and 1300 mm by 1050 mm for Type D; side door 1200 mm (C) or 1300 mm (D) high by 660 mm wide.
  • Doors that lock from inside without a key, and a warning to the driver if a door is open while moving.
  • Stretcher loading angle of no more than 16 degrees and a floor no higher than 750 mm above the ground.

Seats and stretcher (clauses 4.5.3 and 4.5.9)

  • Every crew seat at least 381 mm by 381 mm, with a lap belt or a three-point belt (three-point preferred for forward and rear-facing seats) to IS 15140.
  • Main stretcher at least 1800 mm long and 480 mm wide, rated for at least 150 kg, with an adjustable backrest up to 75 degrees, at least two quick-release patient straps, four wheels of at least 100 mm with two brakes.
  • The stretcher and its mounting must survive a 10 g deceleration for 30 milliseconds without breaking or unlocking.

Lighting and electricals (clauses 4.3 and 4.5.5)

  • Interior lights of at least 4000 Kelvin colour temperature so skin colour looks natural; at least 150 lux over the stretcher in Types C and D (50 lux in Type B).
  • Extra medical circuits kept separate from the base vehicle wiring, each fused and labelled; a recessed external 220/240 V socket on Types C and D protected by a 30 mA earth-leakage device.
  • A label in the patient area showing the certified extra electrical load in watts.

What colour and markings must an ambulance have in India?

AIS-125 (Part 1), Annexure 1, says the whole exterior should be brilliant white (RAL 9010, bumpers excluded), with retro-reflective markings: a mirror-image "AMBULANCE" word on the front, a red and yellow Battenburg chequer pattern on the sides, chevron stripes at front and rear for Types C and D, and the Star of Life and emergency number symbol.

WhereType C and DType B
FrontAt least 50% of the front in sulphur yellow (RAL 1016); mirror-image retro-reflective "AMBULANCE" at least 65% of the bonnet width; red and silver chevrons on the bumper, each stripe 150 mm wide at 45 degreesMirror-image "AMBULANCE" on yellow, at least 550 mm wide; reflective tape as per Rule 104 of CMVR
SidesTwo rows of retro-reflective Battenburg squares, 25 cm by 25 cm, red/yellow in the front half and red/white in the rear half; Star of Life 40 cm by 40 cm; emergency number logo 40 cm by 75 cm; yellow contour markingBattenburg squares of at least 12 cm by 12 cm; Star of Life 24 cm by 24 cm; number logo 24 cm by 45 cm
RearAt least 50% covered by red and yellow chevrons kept 10 cm away from the tail lamps; "AMBULANCE" on yellow at least 65% of the width and not under 70 cm; Star of Life on the left rear window and the number logo on the right"AMBULANCE" on yellow at least 550 mm wide; Star of Life and number logo on the rear windows

Other rules in the same annexure that owners often ask about:

  • Logos and names: hospital, company or operator emblems must be non-reflective and no bigger than 60% of the "AMBULANCE" marking. The ambulance calling number, if you have one, must be shown on the side and back.
  • Warning lights: Type A and B ambulances get a single blue flashing beacon on the roof. Type C and D get a set of red and blue lights flashing between 2 and 4 Hz, red by day and blue by night, including two lights low in the windscreen.
  • Siren: speakers face forward; wail and yelp tones at 110 to 120 dB(A); a public address system usable from the driver seat; and the siren switch works only when the warning lights are on.

The code allows changes in the position and size of markings where the vehicle design requires it, and the emergency number logo is fitted by the user, not the builder. Your state transport department may add its own conditions at registration, so confirm locally.

Who certifies an AIS-125 ambulance and what should an owner ask for?

The ambulance builder (or vehicle maker) gets the design type-approved by a CMVR testing agency against AIS-125 (Part 1); as the buyer, you should ask for the type-approval or compliance certificate that names the ambulance Type (A, B, C or D), the model and the base chassis, because the RTO needs it at registration.

Annexure 2 of the code lists the technical file a builder must submit, and it is a good checklist for your own questions. It includes the ambulance category (A/B/C/D), approved base chassis, stretcher make and model with loading angle and height, seat-belt and anchorage details, fire extinguisher details, the siren's compliance with IS 1884, interior lighting levels in lux, the electrical circuit diagram, and test results for flammability, air conditioning, acceleration, water-proofing and dust ingress.

Before you pay, ask the builder for:

  1. A copy of the AIS-125 type-approval or Certificate of Compliance for that exact model and Type.
  2. The owner's manual, which Part 1 (clause 6.2) says must show where the first aid and nursing kit is stored.
  3. The stretcher's make, model and its dynamic test reference.
  4. The declared extra electrical load in watts, which should also be displayed inside the patient compartment.
  5. Written details of which medical equipment, if any, is included. Part 2 says medical equipment "may not be supplied" by the ambulance maker, so do not assume it is in the price.
  6. Confirmation of which amendment of AIS-125 the vehicle meets. The code has been amended since 2014 (Amendment No. 2 to AIS-125 is dated 19 December 2017, for example), and Rule 125-F applies the code "as amended from time to time".

Be careful with goods vans converted locally. The code's own introduction warns that existing law had allowed goods vehicles to be converted "without incorporating essential safety features in patient compartment like side door, forward backward seating, occupant restraints, certified electrical systems". A converted vehicle without type approval can face trouble at registration, at fitness renewal and in insurance claims. Our registration guide in the related list below covers the RTO side.

How does ambulance type affect price and the work available?

The higher the type, the more the vehicle costs to build and equip, but the wider the range of work it can legally and safely take: a Type B suits planned transfers and discharges, a Type C can attend emergencies and inter-hospital transfers, and a Type D can carry critical patients who need a ventilator or cardiac monitoring.

What drives the price up

  • Base vehicle: Types C and D need a panel van with enough height and length for the 1300 mm door openings, walkway and head-end space; a Type B can be built on a smaller van.
  • Fit-out: partition wall, disinfectant-proof lining, crash-tested stretcher, extra wiring, sockets and lighting, air conditioning (required in Type D).
  • Medical equipment: the jump from Type C to Type D adds a defibrillator, monitor and ventilator, often costing more than the body work. Part 2 says the maker may not supply these.
  • Running cost: two or more oxygen cylinders to refill, equipment servicing, and trained staff.

We have not quoted rupee figures here because prices change with the chassis, the builder and the equipment list. Our price guide in the related list compares current listed prices, and you can see real asking prices for used ambulances on the buy and sell page.

Where each type finds work

  • Type B: hospital discharge, dialysis and outpatient trips, transfers of stable patients, and dead-body transport where local rules allow it.
  • Type C: emergency calls from homes and accident sites, private hospital tie-ups, and event standby.
  • Type D: inter-hospital transfers of ICU patients, long-distance critical transfers, and hospital-owned fleets.

Government and hospital tenders usually name the AIS-125 Type they want, so a vehicle certified as Type B cannot be offered where a Type C or D is asked for. Never advertise a higher level of care than your certificate and crew support. Owners in the AOA app often post about which type gets steady work in their district, and you can read and ask in the community after you download the AOA app from the Play Store.

What is the 2026 draft CMVR amendment on ambulance equipment?

MoRTH published draft notification G.S.R. 382(E), dated 14 May 2026, proposing to replace Rule 125-F of the Central Motor Vehicles Rules; it is a draft for public comment, and the Ministry has said the changes take effect only from the date given in the final notification. When we checked on 18 November 2026 we could not find a final notification in the Gazette.

The draft rule text has three parts:

  1. Road ambulances of categories L and M manufactured on and after 1 April 2018 shall comply with AIS-125 (Part 1)-2014 as amended (this repeats the current rule).
  2. Category M ambulances of Type B, C and D "manufactured on and after three months from the date of the final notification" shall carry emergency and safety/rescue equipment as specified in AIS-125 (Part 1), as amended.
  3. Pure electric ambulances manufactured on and after 1 October 2026 shall have additional batteries to power the on-board medical devices, as specified in AIS-125 (Part 1).

The draft invited objections and suggestions for thirty days after copies of the Gazette were made available. A Press Information Bureau release from MoRTH on 2 July 2026 said amendments to AIS-125 Parts 1 and 2 have been adopted, adding two specialised types, the Neonatal Road Ambulance and the Multi-stretcher Road Ambulance, along with the rescue equipment and e-ambulance power provisions.

What this means for an owner today:

  • If you are buying a new Type B, C or D ambulance, ask the builder whether it already meets the amended AIS-125 rescue equipment list, because the requirement would apply three months after the final notification.
  • The draft talks about vehicles manufactured after a date; it does not say existing ambulances must be refitted. Watch for the final text.
  • Follow the AOA news page and the MoRTH website for the final notification.

How can an owner check whether an ambulance meets AIS-125?

You can do a quick first check yourself by comparing the vehicle with its certificate and the code's visible requirements; anything doubtful should be confirmed with the builder's type-approval papers and the RTO.

  1. Match the papers: the Type on the certificate and on the RC should match the words on the body ("Patient Transport", "Basic Life Support" or "Advanced Life Support").
  2. Look at the outside: white body, mirror-image AMBULANCE on the front, Battenburg squares, Star of Life, correct beacon (single blue on Type A/B, red-blue set on C/D).
  3. Open the doors: rear and side openings, locks that open from inside without a key, door-open warning on the dashboard.
  4. Check inside: partition window for Type C/D, washable lining, wash basin, lockable drug box, hand-hold above the stretcher, two fire extinguishers.
  5. Check the stretcher: locks firmly into its mount, two patient straps, brakes work, backrest adjusts.
  6. Check the seats: every crew seat has a working belt.
  7. Check the power: labelled sockets, the watt-load label, the external power socket with its caution label.

When you buy a used ambulance, these checks also help you judge whether a seller's "ICU ambulance" claim holds up. If you own an AIS-125 ambulance and want to be found by other members, you can register your ambulance with AOA and upload its documents.

हिंदी सारांश: AIS-125 एम्बुलेंस टाइप

AIS-125 भारत का राष्ट्रीय एम्बुलेंस कोड है, जिसे ARAI ने अगस्त 2014 में सड़क परिवहन मंत्रालय के लिए जारी किया। केंद्रीय मोटर वाहन नियम 125-F के अनुसार 1 अप्रैल 2018 या उसके बाद बनी हर एम्बुलेंस को AIS-125 (Part 1) का पालन करना होता है। इसमें चार टाइप हैं: टाइप A फर्स्ट रिस्पॉन्डर, टाइप B मरीज़ परिवहन वाहन, टाइप C बेसिक लाइफ सपोर्ट (BLS) और टाइप D एडवांस्ड लाइफ सपोर्ट (ALS)। कोड के अनुसार गाड़ी का रंग सफेद, आगे उल्टे अक्षरों में "AMBULANCE", किनारों पर लाल-पीले चौखाने और स्टार ऑफ लाइफ होना चाहिए। गाड़ी खरीदते समय बिल्डर से AIS-125 का टाइप अप्रूवल प्रमाणपत्र ज़रूर लें। मई 2026 का ड्राफ्ट नियम G.S.R. 382(E) अभी अंतिम रूप से लागू नहीं हुआ है।

Frequently asked questions

Is AIS-125 compulsory for all ambulances in India?

Rule 125-F of the Central Motor Vehicles Rules, inserted by G.S.R. 868(E) in September 2016, makes AIS-125 (Part 1) apply to category L and M road ambulances manufactured on and after 1 April 2018. It is not mandatory for ambulances of the armed forces, para-military forces and police. Older ambulances were built before the rule applied, but your RTO decides how they are treated at fitness renewal.

What is a Type C ambulance?

A Type C road ambulance is the Basic Life Support (BLS) ambulance in AIS-125. The code defines it as a vehicle designed, equipped and staffed to transport and treat patients who need non-invasive airway management or basic monitoring. It needs a partition wall, two crew seats, at least two 12 V medical sockets, two fire extinguishers and, under Part 2, two 10-litre oxygen cylinders.

Is an ICU ambulance the same as a Type D ambulance?

People in India often call an Advanced Life Support ambulance an ICU ambulance, but AIS-125 uses only the term Type D Advanced Life Support. A Type D is built for emergency patients needing invasive airway management and intensive monitoring, with air conditioning, four medical sockets and a strong treatment light. Ask for the certificate, because the name painted on the body proves nothing.

Does AIS-125 say which colour an ambulance must be?

Yes. Annexure 1 of AIS-125 (Part 1) says the exterior should be brilliant white, RAL 9010, excluding bumpers. Type C and D ambulances add sulphur yellow on at least half the front, retro-reflective red and yellow Battenburg squares on the sides, chevron stripes on the bumpers and rear, and the Star of Life symbol.

Does the ambulance builder supply the medical equipment?

Not necessarily. AIS-125 (Part 2) says medical equipment may not be supplied by the ambulance manufacturer and that equipment is not part of vehicle type approval. Its equipment tables are recommendations. Get the included equipment list in writing before you pay, and budget separately for anything missing.

Has the 2026 ambulance rescue equipment rule come into force?

Not as of 18 November 2026, as far as we could find. MoRTH draft G.S.R. 382(E), dated 14 May 2026, proposed rescue equipment for new Type B, C and D ambulances from three months after the final notification, and extra batteries for electric ambulances. Check the Gazette of India or MoRTH website for the final notification.

Can a two-wheeler be an ambulance under AIS-125?

Only as a Type A first responder. AIS-125 notes that 2-wheeled and 3-wheeled vehicles may be used as Type A ambulances, which give care at the scene but do not carry a patient lying down. They must be marked "FIRST RESPONDER" rather than "AMBULANCE" and use a single blue beacon.

Sources

Rules and prices change: check the official source listed below before you decide.

Read next